Underpass Flared End Sections |
|
Tie bolt holes are provided for the installation of tie bolts between the flared end section and the adjacent pipe. |
|
|
| SIZE W x H |
SLOPE | T | A | B | LAYING LENGTH | F | G | K | WEIGHT PER SECTION |
|---|---|---|---|---|---|---|---|---|---|
| FEET | X to Y | INCHES | FEET | FEET | FEET | FEET | INCHES | INCHES | LBS. |
| 4 x 5 | 1.7 to 1 | 5 | 2'-6" | 5'-0" | 8 | 6 | 5 | 5 | 7320 |
| 4 x 6 | 2 to 1 | 5 | 2'-11" | 7'-0" | 10 | 7 | 5 | 5 | 10650 |
| 5 x 7 | 1.6 to 1 | 6 | 3'-6" | 7'-5 1/2" | 9 | 7 | 5 | 7 1/2 | 13100 |
End section is manufactured in accordance with applicable portions of ASTM Specification C76.
| Download this page in the following formats |
|
 AutoCAD r14 |
 Acrobat (PDF) |
Service Tunnel Flared End Sections |
|
Tie bolt holes are provided
for the installation Weight = 18160 Lbs. |
|
|
End section is manufactured in accordance with applicable portions of ASTM Specification C76.
| Download this page in the following formats |
|
AutoCAD r14 |
Acrobat (PDF) |
