ICPC Gasketed RCP Bend Details

Cretex reinforced concrete pipe bends are used to obtain smooth curves in a pipe line. They are cast as standard 7 1/2° bends. Bend reinforcing and concrete shall be the same as required for adjoining pipe sections.

D	T	LAYING LENGTH ON CENTER OF PIPE	RADIUS OF CURVE AT CENTER OF PIPE	WEIGHT PER SECTION
INCHES	INCHES	INCHES	FEET	LBS.
15	5 3/4	9 1/2	6.1	315
18	6	9 13/16	6.2	305
21	6 1/4	9 11/16	6.2	415
24	6 1/2	10	6.4	530
27	6 3/4	11 3/16	7.1	620
30	7	12 3/16	7.7	870
36	7 1/2	14 1/16	8.9	1155
42	8	16 15/16	10.8	1700
48	8 1/2	18 9/16	11.8	2320
54	9	21	13.4	3230
60	9 1/2	22 1/8	14.1	3800
66	10	23 1/8	14.7	4585
72	7	22 5/8	14.4	3420

Centerline laying length...4'-0"
Angle of bend...7°-30'
Radius of curve...30.5'

D	WEIGHT PER SECTION	T	A	B	C	E
INCHES	LBS.	INCHES	INCHES	INCHES	INCHES	INCHES
12	535	2	36 15/32	10 15/32	37 17/32	11 17/32
15	660	2 1/4	36 1/2	10 1/4	37 3/4	11 1/2
18	870	2 1/2	24 1/2	22	26	23 1/2
21	1150	2 3/4	24 1/2	21 3/4	26 1/4	23 1/2
24	1290	3	25 1/32	21 1/32	26 31/32	22 31/32
27	1510	3 1/4	25 1/32	20 25/32	27 7/32	22 31/32
30	1810	3 1/2	25 1/32	20 17/32	27 15/32	22 31/32
33	2155	3 3/4	24 15/16	20 7/16	27 9/16	23 1/16
36	2460	4	24 13/16	20 5/16	27 11/16	23 3/16
42	3475	4 1/2	24 27/32	19 27/32	28 5/32	23 5/32
48	4490	5	24 19/32	19 19/32	28 13/32	23 13/32
54	5255	5 1/2	24 5/8	19 1/8	28 7/8	23 3/8
60	5935	6	24 21/32	18 21/32	29 11/32	23 11/32
66	6760	6 1/2	24 11/16	18 3/16	29 13/16	23 5/16
72	7645	7	24 1/8	18 1/8	29 7/8	23 7/8
84	9990	8	24 1/4	17 1/4	30 3/4	23 3/4
*90	11300	8 1/2	29	13	35	19
96	12855	9	23 5/16	17 5/16	30 11/16	24 11/16
*90" Bend has 6°-28' angle and 35.4' radius of curve

Bends may be fabricated to any specified angle for circular, arch and elliptical pipe, and for box culverts and underpasses. Skilled and experienced workmen produce a product that not only looks like it was made by professionals but it also does the job for you - and eliminates costly field construction work

Download this page in the following formats
AutoCAD r14	Acrobat (PDF)